Carpet Anti-slip helps to prevent accidents. This tape offers safe working and walking by when applied on stairs and walkways, both indoors and outdoors. It has a mineral-coated plastic film with a pressure-sensitive adhesive protected by a removable liner. The tape is made using aluminum oxide mineral particles and has a solvent acrylic adhesive material. Furthermore, the tape can be applied at a temperature between 5 °C and 50 °C.

The Carpet Anti-slip is an effective and cost-efficient way to enhance safety and prevent slip-and-fall accidents in both maritime and commercial environments. It provides peace of mind by reducing the risk of injuries associated with slippery surfaces.

Carpet Anti-slip tape offers excellent grip in foot traffic areas, including floor,bed room,hall stairs, steps, shop fronts, vehicles, machinery and floors etc that are likely to get contaminated with water. Anti slip tape is easily cut to size using scissors or a sharp Knife.
Anti-slip tape is a type of adhesive tape specifically designed to reduce the risk of slips, trips, and falls on surfaces that may be slippery. It is commonly used to enhance safety by providing traction and grip on floors, stairs, ramps, and other surfaces. It is especially valuable in areas prone to moisture or where spills are likely to occur, such as manufacturing facilities.

semi transparent anti slip tape

Allows the subfloor colour to show through

Reduces the risk of slip accidents

Use indoors or outdoors

Use almost anywhere extra grip is required

Very cost effective slip prevention solution

Easy to cut to size using a scissors or a knife

Self adhesive for fast and easy application

Manufactured in the China to the highest quality standards

Helps your business meet DDA and other safety regulations

Increase the lifespan of your anti slip tapes by using Edge Seal Adhesive

How to Use The Carpet Anti-Slip Tape step by step?

Step 1: Clean the back of the carpet

Before using carpet tape, make sure the back of the carpet is free of dust to ensure the best results.

Step 2: Cut the carpet tape

Turn the carpet upside down with the back side facing us and cut the right length of carpet tape to suit the size of the edge of the carpet.

Step 3: Apply

Remove the release paper from the back of the tape and place the adhesive side on the back of the carpet, with the non-adhesive side facing the floor.

Step 4: Pressing

After the tape has been applied, press the surface of the tape with your hand to make a tighter fit between the glue and the carpet, for better results.

Step 5: Tape all four sides

Repeat the above 3 steps to apply non-slip tape to all edges of the carpet, then turn the carpet over and use it directly.